Kodak Disc film adapter made for Epson Perfection V500, V550 and V600 scanners

Description

Visit My eBay Store: Negative Solutions
This is a Kodak Disc format negative holder for use with
Epson Perfection V500, V550 and V600 flatbed film scanners
(US Patent Pending)
.
This will also work on Epson
2450, 3170, 3200, and 4180 scanners.
This was custom made for use with the obsolete Kodak Disc format that was briefly popular some 30 years ago.  Unfortunately not only is it almost impossible to get prints made from Kodak Disc negatives these days, but Disc negative holders are hard to come by and the ones that you can find cost upwards of 0. Please remember that the Kodak Disc format recorded an image of 8 x 11 mm, which is the same size as the Minox "spy" cameras.  With a negative image this small, it's important that you have realistic expectations on the quality of scan you'll get from your Disc negatives.
New!  Negative Solutions is the first to offer a Kodak Disc holder for this model of scanner that does
not
require removing the center hub!
Specifications for the Kodak Disc negative holder:
Overall: 65 mm diameter
Material:  Plastic
SPECIAL NOTE FOR INTERNATIONAL BUYERS
:  Ebay has recently changed rules for international buyers.  If you are buying multiple items from the same seller you can no longer combine shipping.  Ebay will also require you to pay immediately so I am not able to send you an invoice for combined shipping.  Unless something changes (or unless you know of a way to combine shipping that I haven't found yet), your only option is to buy and pay for each item separately.  This will likely result in overpayment of shipping charges.  I always refund overpayment of combined shipping charges, but unfortunately Ebay charges sellers a 10% commission on the original shipping charge and will not refund the difference.  I will continue to refund overpayment of shipping on multiple items, but in the future I will have to deduct the 10% commission that Ebay sticks me with.  I apologize for the inconvenience.  Hopefully Ebay will change this practice soon!
Satisfaction is guaranteed!
Visit My eBay Store: Negative Solutions
Important additional notes:
- If you are buying my holders for resale, please be aware that my products are more about "function" over "form."  This is why they are so inexpensive compared to other commercially produced options.  Each holder is custom made and may contain spot sanding and other finishing marks.  I do my best to clean my products up cosmetically, but due to sales volume I simply can't spend a lot of time on it.  My main concern is that it works like it is supposed to.  As a result, if you are reselling please be aware that you may need to do some more finishing work suitable for a retail environment.
- Aftermarket holders for odd film sizes will usually require the ability to manually scan film strips with "thumbnail" modes turned off.  Depending on your model and software, masking of individual frames for scanning may be necessary for the best results.  Please ensure you know how to set your scanner/software for full manual control.  Simply pushing a green button on the front of your scanner (common with Epson models) to scan a film strip will not work with most aftermarket film holders.
- Please pay particular attention to the "handling" days before shipping as noted above.  I do not typically maintain an inventory of my film holders as most are custom made upon order placement.  As such, I ask for 5 business days handling before shipping.  My average is likely around 2 days, but there are occasions where orders are very high and I may need all 5 business days before I am able to ship your holder.  Please keep this in mind.